Manual progecad lt 2006

Controls the distance beyond the extension line that the dimension line extends when using dimension lines with oblique strokes. Controls the spacing offset of the dimension lines when drawing baseline dimensions. Controls the amount of space between the entity being dimensioned and the extension line. This system variable is no longer required; it is included for compatibility reasons only.

Controls the amount of space before and after the dimension text and the closest end of the dimension line. Sets the horizontal position of the dimension text to one of the following options: centered 0, the default value ; next to the first extension line 1 ; next to the second extension line 2 ; perpendicular to the first extension line 3 ; perpendicular to the second extension line 4. Controls the scale factor for variables affecting dimensioning size, distance, and offset.

Controls the update of dimension measurements while increasing or decreasing the size of a dimensioned entity. Toggles on or off the placement of dimension lines outside the extension lines. Controls the ability for you to list the available dimension styles and apply a new style from those available. Determines the vertical placement of dimension text in relation to the dimension line.

Controls the ability for you to specify the number of decimal places to display tolerance values in a dimension. Specifies the scale factor used to calculate the text height of fractions and tolerance values of dimension text. Positions dimension text inside the extension lines either horizontally on or aligned with the dimension line off. Toggles on or off the drawing of a dimension line between the extension lines when text is placed outside the measured points.

Sets the placement of dimension text outside the extension lines. Determines the size of the oblique strokes drawn, replacing the arrowheads in linear, radius, and diameter dimensioning. Sets the vertical position of dimension text relative to the dimension line. Specifies the height of dimension text.

Determines the suppression of leading and trailing zeros in tolerance values of dimensions. Controls the option for you to control the dimension line location only or both the dimension line location and the text position.

Determines the suppression of leading and trailing zeros in primary dimension text. Controls the display of entities as you drag them. Inserts or opens a drawing file that has been dragged from the desktop onto the drawing area. Stores the elevation value in the user coordinate system UCS for the active workspace model or paper. Sets the time delay for when entity tracking paths display or hide when the crosshair is over an entity snap marker.

Limits the details of the prompts displayed in the command bar. Determines the user experience level. Controls whether layers are visible for external references when using progeCAD Explorer.

Determines the aspect ratio used for the display of 3D solids, particularly when they are rendered. Controls whether the intersection between two text entities is determined when using Intersection Snap. Provides an alternate font to be used when a font specified in the drawing is unavailable.

Designates the font mapping file used by the program when substituting one font for another. Sets the scale factor used for point indicators and multiline text entities when creating position markers. Specifies the default color assigned to gradient patterns that have only one color or to the first color of gradient patterns that have two colors. Specifies the default color assigned to the second color of gradient patterns that have two colors. Specifies whether the default gradient pattern is defined by one color or two colors.

Controls whether the cursor always snaps to the nearest entity snap point when AutoSnap magnet is turned on. Determines whether only one grip point for a block displays or if the grip points for all the entities in the block display.

Determines the fill color of unselected grips when the cursor pauses over them. Sets the size of a gap that displays in 2D wire-frame view when one entity overlaps another entity. Determines the level of precision when viewing a drawing as a hidden-line image or shaded image in wire-fame view. Controls the number of selected entities and subentities that will be shown as highlighted over regular entities. Stores the number of entities that can be selected before a warning message displays when creating hatches.

Controls whether the hatch pattern displays in the drawing for selected entities while choosing options in the Boundary Hatch dialog box. Stores whether a single hatch entity or separate, multiple hatch entities are created when more than one closed boundary is selected for hatch creation. Turns on and off the display of tooltips that display for entities with hyperlinks assigned.

Reports a bit code representing which CPUs were assigned by the operating system and were being used by progeCAD at startup. Stores the base point location for inserting a drawing as set by the BASE command. Specifies the default units used when inserting blocks, external references, and images.

Stores the angle value for the last line segment created relative to the current user coordinate system UCS. Stores the value of the last point entered relative to the current user coordinate system UCS. Specifies the fade percentage applied to entities that are located on locked layers. Controls whether a layout viewport is created automatically for each new layout that is added to a drawing.

Controls how drawings are regenerated when switching between the Model tab and Layout tabs. Determines whether the LISP environment is re-initialized when a new drawing is created or opened. Displays the name of the folder, including the full path, where customizable files are installed. Determines the draft angle for the first cross section when creating lofted entities.

Determines the draft angle for the last cross section when creating lofted entities. Determines the draft angle magnitude for the first cross section when creating lofted entities. Determines the draft angle magnitude for the last cross section when creating lofted entities. Toggles whether the commands executed in the program are maintained in a log file or not. Determines whether information about font substitution is added to the default log file.

Controls the display of linetypes. Sets the default linear units. Controls the number of decimal places shown for coordinate display and linear units in commands.

Controls whether the program converts normal polylines to lightweight polylines when saving a drawing file. Stores an older version of a drawing file with a. Includes a user-defined text string in the status line. Determines whether linetypes scale on the Model tab according to the annotation scale. Determines the size and orientation of multiline text when editing multiline text in-place.

Determines how fields are handled when exploding multiline text that contains fields. Determines the background color of oblique text when it displays in the Multiline Text dialog box. Determines the background color of stacked text when it displays in the Multiline Text dialog box. Displays the full path of the "My Documents" folder for the user who is currently logged in.

Determines the color of hidden lines, which are made visible in wire-frame view using this system variable. Determines the linetype of hidden lines, which are made visible in wire-frame view using this system variable.

Changes the default setting for the offset distance. Controls the color of the orbit widget that displays on the screen when using the Free Orbit command. Restricts cursor movement to perpendicular directions relative to the UCS and grid rotation angle. Determines whether coordinates entered at the command prompt override entity snaps that are turned on. Determines whether you can snap to hatch entities when entity snaps are turned on.

Determines whether multiline text entities are available when using Node snap. Determines the z-coordinate of the specified point or of the current UCS at the current elevation is used when entity snaps are turned on. Determines whether entity snaps apply to hatch entities, geometry with negative Z values when using a dynamic UCS, and underlays. Controls how constraints and related parameters are handled when constrained entities are copied between drawings, model space, paperspace or a block.

Determines whether progeCAD automatically sends and receives system information from an progeCAD server to increase program stability.

Controls the point display size. This website uses tracking mechanisms by using technically not necessary cookies in order to offer and constantly improve its services, and to provide individual offers. By clicking on "I Agree" you agree to this.

By clicking on "Accept only required cookies" you decline this. You can revoke your consent at any time with effect for the future under Cookie settings at the bottom of this page. Further information on the use of cookies can be found in our data protection declaration. Allow only required cookies. I agree. N95, KN95, KF94 masks. GameStop PS5 in-store restock. Baby Shark reaches 10 billion YouTube views. Microsoft is done with Xbox One. Windows Windows. Most Popular.

New Releases. Desktop Enhancements. Networking Software. Trending from CNET. Kyodai Mahjongg Free to try. Play Mahjongg Solitaire in 2D or 3D mode.

Create and edit professional design drawings. First Page Free to try. Create, edit, and deploy Web sites with ease and precision.