Off wifi on vista

Also, make sure Airplane mode is turned off. If it does, select the Wi-Fi network, and they try to connect to it. If it says Connected underneath the network name, select Disconnect , wait a moment, and then select Connect again. Try connecting to a network on a different frequency band.

Many consumer Wi-Fi routers broadcast at two different network frequency bands: 2. These will appear as separate networks in the list of available Wi-Fi networks. If your list of available Wi-Fi networks includes both a 2. To learn more about the differences between 2. An indicator light usually shows when it's on. Run the Network troubleshooter. The Network troubleshooter can help diagnose and fix common connection problems. Select the Start button, then type settings. Restart your modem and wireless router.

This helps create a new connection to your internet service provider ISP. When you do this, everyone that is connected to your Wi-Fi network will be temporarily disconnected. The steps you take to restart your modem and router can vary, but here are the general steps.

Unplug the power cable for the modem from the power source. Some modems have a backup battery. If you unplug the modem and lights stay on, remove the battery from the modem. Wait at least 30 seconds or so. If you had to remove the battery from the modem, put it back in. Plug the modem back into the power source. The lights on the modem will blink. Wait for them to stop blinking.

Plug your router back into the power source. Wait a few minutes for the modem and router to fully power on. Connection problems can be due to a variety of reasons—problems with the website, your device, the Wi-Fi router, modem, or your Internet Service Provider ISP. Try the following steps to help narrow down the source of the problem.

If the "Wi-Fi connected" icon appears on the right side of the taskbar, visit a different website. If the website opens, there might be a problem with the specific website. If you can't connect to another website, go to the next step. On another laptop or phone, try to connect to the same network. If you can connect, the source of the problem is likely due to your device—go to the section Network troubleshooting on your device. If you can't connect to the network on any device, continue to the next step.

Check to see if there is a problem with the connection to your Wi-Fi router. Do this by using a ping test. Select Search on the taskbar, type Command prompt. The Command Prompt button will appear.

At the command prompt, type ipconfig , and then select Enter. Look for the name of your Wi-Fi network within the results, and then find the IP address listed next to Default gateway for that Wi-Fi network. Write down that address if you need to. For example: For example, type ping The results should be something like this:. Reply from Ping statistics for If you see results like this and are getting a reply, then you have a connection to your Wi-Fi router, so there might be a problem with your modem or ISP.

Contact your ISP or check online on another device if you can to see if there's a service outage. If the results of the ping test indicate that you are not getting a reply from the router, try connecting your PC directly to your modem by using an Ethernet cable if you can.

If you can connect to the internet using an Ethernet cable, it confirms the connection problem is due to the Wi-Fi router. Make sure you've installed the latest firmware and see the documentation for your router.

At the command prompt, run the following commands in the listed order, and then check to see if that fixes your connection problem:. Type netsh winsock reset and select Enter.

Type netsh int ip reset and select Enter. Uninstall the network adapter driver and restart. Windows will automatically install the latest driver. Consider this approach if your network connection stopped working properly after a recent update.

Before uninstalling, make sure you have drivers available as a backup. Select Search on the taskbar, type Device Manager , and then select Device Manager from the list of results.

Expand Network adapters , and locate the network adapter for your device. After your PC restarts, Windows will automatically look for and install the network adapter driver. Check to see if that fixes your connection problem. If Windows doesn't automatically install a driver, try to install the backup driver you saved before uninstalling.

Check if your network adapter is compatible with the latest Windows Update. If you lost your network connection immediately after upgrading to or updating Windows 11, it's possible that the current driver for your network adapter was designed for a previous version of Windows. To check, try temporarily uninstalling the recent Windows Update:. Select the Start button, then enter settings. If uninstalling the most recent update restores your network connection, check to see if an updated driver is available:.

To learn how to hide updates, see Hide Windows Updates or driver updates. If you could successfully install updated drivers for your network adapter, then reinstall the latest updates. To do this, select the Start button, then enter settings. Using network reset should be the last step you try. This can help solve connection problems you might have after upgrading from Windows 10 to Windows It can also help to fix the problem where you can connect to the internet, but can't connect to shared network drives.

Network reset removes any network adapters you have installed and the settings for them. Access the Device Manager by right-clicking with your mouse on the My Computer icon on your desktop or in the Windows Start menu. Select Properties from the pop-up menu, click the Hardware tab in the window that opens up, and click the Device Manager button. In Windows Vista and later, there is no Hardware tab.

Click the Device Manager link in the System window. Find the Wi-Fi adapter in the list of hardware devices. Right-click the adapter name and select Enable from the pop-up menu. It is usually found on the front of the laptop or above the keyboard. Find the button or switch and make sure it is disabled. When disabled, the button should not be illuminated or illuminated as orange or red, or the switch should be in the Off position. As seen in the picture, some laptops use Fn and F12 key to enable and disable Wi-Fi, and shows an orange LED when disabled and blue when enabled.

Right-click the Wi-Fi icon in the Windows notification area and select Disable or Turn off from the pop-up menu. If no Disable option is available in the pop-up menu, there may be an option called Open Network and Sharing Center.

Once the wireless network card icon is seen right-click and select Disable. The Wi-Fi adapter may also be disabled from the Control Panel. Click the Network and Sharing Center option, then click Change adapter settings in the left navigation pane. Right-click the Wi-Fi adapter, and select Disable. Right-click the adapter name and select Disable from the pop-up menu. Read Elsie's Full Bio.

We hate spam too, unsubscribe at any time. Table of Contents. Subscribe on YouTube! Did you enjoy this tip? We cover Windows, Mac, software and apps, and have a bunch of troubleshooting tips and how-to videos.

Click the button below to subscribe! Subscribe to Help Desk Geek.