Pt cruiser keyless remote program

Turn ignition switch off until it is in the LOCK position and remove the key. Within 15 seconds, insert the second valid key and turn the ignition to the ON position. Wait ten seconds or until a chime sounds and the vehicle security light begins to flash. Turn the ignition off until it is in the LOCK position and remove the key. Within 60 seconds, insert the new blank sentry key into the ignition switch and turn it to the ON position. Wait 10 seconds or until you hear a single chime and the vehicle security light stops flashing.

Look for the indicator light on the dashboard. If it turns on for three seconds and then turns off, the key has been successfully programmed. After attending Fairfield University, Hannah Wickford spent more than 15 years in market research and marketing in the consumer packaged goods industry.

In she decided to shift careers and now maintains three successful food-related blogs and writes online articles, website copy and newsletters for multiple clients.

Step 1 Bring the replacement sentry key to a hardware store or dealership. Step 2 Place the first valid key into the PT Cruiser's ignition and turn to the ON position for a minimum of three seconds and a maximum of 15 seconds. Step 3 Within 15 seconds, insert the second valid key and turn the ignition to the ON position. You can program as many as four of these remotes to your car in just seconds from your driver's seat and have the remotes ready to use in no time.

Press and hold the "Unlock" button on the keyless remote for four seconds, then press and hold the "Panic" button while still holding the "Unlock" button. Wait for a chime to sound from your car then press any button on the remote within 30 seconds.

Wait for another chime and the programming will be complete. You can then turn the ignition key to the "Off" position. Matthew Fortuna is a full-time freelance writer with a journalism degree from Wayne State University, living in the Detroit metropolitan area.